Lorem ipsum dolor sit amet, consectetur adipisic ing elit, sed do eiusm
Lorem ipsum dolor sit amet, consectetur adipisic ing elit, sed do eiusm

Magazine Wrapper Design with Microsoft Word 2007





magazine is a publication, usually a periodical publication, which is printed or electronically published (sometimes referred to as an online magazine). Magazines are generally published on a regular schedule and contain a variety of content. They are generally financed by advertising, by a purchase price, by prepaid subscriptions, or a combination of the three.
At its root, the word "magazine" refers to a collection or storage location. In the case of written publication, it is a collection of written articles. This explains why magazine publications share the word root with gunpowder magazinesartillery magazinesfirearms magazines, and, in French, retail stores such as department stores.

By definition, a magazine paginates with each issue starting at page three, with the standard sizing being 8 38 in × 10 78 in (210 mm × 280 mm).[citation needed] However, in the technical sense a journal has continuous pagination throughout a volume. Thus Business Week, which starts each issue anew with page one, is a magazine, but the Journal of Business Communication, which d continues the same sequence of pagination throughout the coterminous year, is a journal. Some professional or trade publications are also peer-reviewed, an example being the Journal of Accountancy. Academic or professional publications that are not peer-reviewed are generally professional magazines. That a publication calls itself a journal does not make it a journal in the technical sense; The Wall Street Journal is actually a newspaper.


Read more

IDentity Card Design using MS Word - Lesson # 5





An identity document (also called a piece of identification or ID, or colloquially as papers) is any document which may be used to prove a person's identity. If issued in a small, standard credit card size form, it is usually called an identity card (ICID cardcitizen card), or passport card. Some countries issue formal identity documents, as national identification cards which may be compulsory or non-compulsory, while others may require identity verification using regional identification or informal documents. When the identity document incorporates a person's photograph, it may be called photo ID.
In the absence of a formal identity document, a driver's license may be accepted in many countries for identity verification. Some countries do not accept driver's licenses for identification, often because in those countries they do not expire as documents and can be old or easily forged. Most countries accept passports as a form of identification. Some countries require all people to have an identity document available at any time. Many countries require all foreigners to have a passport or occasionally a national identity card from their home country available at any time if they do not have a residence permit in the country.
The identity document is used to connect a person to information about the person, often in a database. The photo and the possession of it is used to connect the person with the document. The connection between the identity document and information database is based on personal information present on the document, such as the bearer's full name, age, birth dateaddress, an identification number, card number, gender, citizenship and more. A unique national identification number is the most secure way, but some countries lack such numbers or don't mention them on identity documents.


Read more

CD Label Design using MS Word - Lesson # 4





CD Replication Printing Templates

cd replication printing template Your disc label artwork should be provided as an electronic file matching one of our three templates. 
The Standard CD label template is used for basic disc label designs.  The art dimensions are 116 mm for the outer edge and 45 mm for the inner edge.  The image area extends from the edge of the disc to the outer edge of the mirror band.
The Extended Image CD label template provides for a larger disc label image area. The art dimensions are 116 mm for the outer edge and 38 mm for the inner edge.  The image area extends from the outer edge of the disc to the inside edge of the mirror band.  Because the art extends over the mirror band it is recommended that type and small graphics do not extend over the mirror band unless a solid background is added to cover the mirror band. 
The Maximum Image Area CD label template provides the largest label size.  This layout is used for most Full color offset printed CDs.  A white layer is printed and then the four color process colors are printed over the top of the white layer.  The art dimensions are 116 mm for the outer edge and 24 mm for the inner edge.
Check with customer service before you send your artwork to insure the template that you have selected is appropriate for your project.
You supply your disc artwork as an electronic file set to one of our standard templates.  Our preferred file formats for artwork are: Adobe CS3 or lower versions of Illustrator, InDesign, Photoshop, and EPS file.  A high resolution tif file can also be used for CMYK art.  Generally we can accept all of the professional grade page layout and design programs on both the Macintosh and Windows platforms.  Fonts should be converted to outlines whenever possible.
Art must be set up as either CMYK color or Spot Pantone colors.  RGB color is not appropriate for printing.  RGB colors will be converted to CMYK and may cause unexpected color shifts.
Need to send us an art file?  Use our file upload utility
Tips for Creating Your CD Label Artwork
The surface of the disc is silver not white.   Many people use the silver surface in their design.  Others will print a solid color for the background and then design their art to print on top of this background color.
We strongly recommend that you use type no smaller than 6 pts. For type to be legible, the color of the type must contrast with the background. Type of a solid color is easier to read than type that is a blend of colors.
For CMYK images we strongly recommend offset printing over a white background.  Images with screens, blends, and halftones generally look best when printed using the offset printing process.
Images with large areas of solid PMS colors look best when silk screen printed.


Read more

Certificate Design using MS Word - Lesson # 3





Certificate may refer to:


Read more

Letterhead Design using MS Word - Lesson # 2





heading usually consists of a name and an address, and a logo or corporate design, and sometimes a background pattern. The term "letterhead" is often used to refer to the whole sheet imprinted with such a heading.

Many companies and individuals prefer to create a letterhead template in a word processor or other software application. This generally includes the same information as pre-printed stationery, but at lower cost. Letterhead can then be printed on stationery (or plain paper) as needed on a local output device or sent electronically.
Letterheads are generally printed by either the offset or letterpress methods. In most countries outside North America, company letterheads are printed A4 in size (210 mm x 297 mm). In North America, the letter size is typically 8.5 x 11 inches (215 x 280 mm).
Although modern technology makes letterheads very easy to imitate, they continue to be used as evidence of authenticity.


Read more

Business Card Design using MS Word - Lesson # 1





Business cards are cards bearing business information about a company or individual. They are shared during formal introductions as a convenience and a memory aid. A business card typically includes the giver's name, company or business affiliation (usually with a logo) and contact information such as street addressestelephone number(s), fax number, e-mail addresses and website. Before the advent of electronic communication business cards might also include telex details. Now they may include social media addresses such as FacebookLinkedIn and Twitter. Traditionally many cards were simple black text on white stock; today a professional business card will sometimes include one or more aspects of striking visual design.

Business cards are printed on some form of card stock, the visual effect, method of printing, cost and other details varying according to cultural or organizational norms and personal preferences. The common weight of a business card varies some by location. Generally, business cards are printed on stock that is 350 g/m2 (density), 45 kg (100 lb) (weight), or 12 pt (thickness).
High quality business cards without full-color photographs are normally printed using spot colors on sheet-fed offset printing presses. Some companies have gone so far as to trademark their spot colors (examples are UPS brown, Los Angeles Lakers' purple, and Tide's orange).[citation needed] If a business card logo is a single color and the type is another color, the process is considered two-color. More spot colors can be added depending on the needs of the card. With the onset of digital printing, and batch printing, it is now cost effective to print business cards in full color.
To simulate the effect of printing with engraved plates, a less-expensive process called thermography was developed that uses the application of a plastic powder, which adheres to the wet ink. The cards are then passed through a heating unit, which melts the plastic onto the card. Spot UV varnish onto matte laminate can also have a similar effect.
Full color cards, or cards that use many colors, are printed on sheetfed presses as well; however, they use the CMYK (cyan, magenta, yellow, and black) four-color printing process. Screens of each color overprinted on one another create a wide gamut of color. The downside to this printing method is that screened colors if examined closely will reveal tiny dots, whereas spot color cards are printed solid in most cases. Spot colors should be used for simple cards with line art or non-black type that is smaller than 5 points.
Some terminology in reference to full-color printing:
  • 4/0 - Full color front / No print on back
  • 4/1 - full color front / One color on reverse
  • 4/4 - full color front / Full color back
These names are pronounced as "four over zero," "four over one," and "four over four".
A business card can also be coated with a UV glossy coat (offset-uv printing). The coat is applied just like another ink using an additional unit on a sheetfed press. That being said, UV coats can also be applied as a spot coating - meaning areas can be coated, and other areas can be left uncoated. This creates additional design potential. UV Coating is not to be confused with coated stock, which has a gloss or semi gloss finish that is applied before printing.
Business cards can also be printed with a digital copier, which uses toner fused onto the surface of the card, however many modern printing firms instead utilise high end "Digital Presses," now distinct from office copiers, which range from light production units such as the Bizhub 5500 from Konica Minolta, to state of the art units such as the latest HP Indigo Digital Presses.
While some of the older office copiers may have had problems running heavy business card stock, the newest digital presses can print on stock as heavy as 407 g/m2 (150# cover stock),[3] and special substrates such as polypropylene. Available in both sheet-fed and web-fed models, many modern digital presses can emulate Pantone spot colors, print in up to seven colours in one pass, and some even contain embedded spectrophotometers and air-assisted feeding systems.
UV coats, and other coatings such as aqueous coatings are used to speed manufacturing of the cards. Cards that are not dry will "offset", i.e., the ink from the front of one card will mark up back of the next one. UV coatings are generally highly glossy but are more likely to fingerprint, while aqueous coatings are not noticeable but increase the life of the card. It is possible to use a dull aqueous coating on uncoated stock and get some very durable uncoated cards, and using UV coating or plastic lamination can also be applied to thicken thin stocked cards and make them more durable as well.
When cards are designed, they are given bleeds if color extends to the edge of the finished cut size. (A bleed is the extension of printed lines or colors beyond the line where the paper it is printed on will be cut.) This is to help ensure that the paper will cut without white edges due to very small differences in where the blade cuts the cards, and it is almost impossible to cut the cards properly without. Just being a hair off can result in white lines, and the blade itself will pull the paper while cutting. The image on the paper can also shift from page to page which is called a bounce, which is generally off by a hairline on an offset press, but can be quite large on lower end equipment such as a copier or a duplicator press. Bleeds are typically an extra 3.175 (​18) to 6.35 mm (​14 in) to all sides of the card.
(US)
  • Bleed size: 95.25 × 57.15 mm (3.75 × 2.25 in) (​18 in bleeds)
  • Standard cut size: 89 × 51 mm (3.5 × 2 in)
(UK)
  • Bleed size: 91 × 61 mm (3.58 × 2.40 in)
  • Standard cut size: 85 × 55 mm (3.35 × 2.17 in)
Fold-over or "tent" cards, and side fold cards are popular as well. Generally these cards will fold to the standard size.
Cards can also be printed with a different language on each side.


Read more

NEWS Paper Designing using Microsoft Word 2007

NEWS Paper Designing - Microsoft Word 2007



Microsoft Word 2007 is one of the best software for creating documentation and simple design works. It has most of the features for designing work. Most of the peoples thinking like MS Word is only useful for creating documentation work but not. Here i was given one example that is NEWS Paper Designing with MS Word 2007.




Read more